Monday, August 10, 2015

Rebecca's 8 Tips for warping a tapestry loom

Travel Warping hacks!

Okay, many of these hacks refer to warping a Mirrix loom. But most of my students are using them and these are the questions I see come up again and again. A few of these ideas apply to any tapestry loom.

The video below shows some of the things I do to make warping this loom easier. It isn't a hard loom to warp, it is just different than the big floor looms many of us are used to. There are no warping boards in Mirrix-land.

Here are some of the points I cover in this video.

  1. Leave at least three inches of threaded rod for stability. You don't even want to know what happens when you don't do this.
  2. Which direction do I start warping, up or down? I know you're on the edge of your seats waiting for the answer for that one!
  3. How to keep warps from getting twisted with their neighbors. (no alcohol is involved here--and can I just say that if this particular thing drives you nutty, just buy the bottom spring for your loom. Seriously.)
  4. Double selvedge warps. I'm not the only one who does this... and I love it!
  5. Using a guide thread. Nope, I don't do this, but it can be helpful if you struggle with your selvedges or weft tension.
  6. Moving the warping bar down. Don't forget to do this... or your warp will be much shorter!
  7. How to put the heddles on without throwing the loom through a window. To be honest, I like putting heddles on the Mirrix. The texsolv heddles are wonderful and somehow I don't have trouble seeing the pattern or getting them on without mistakes. Of course that could also just be because I've warped a lot of these looms. Don't resort to violence (I always advocate a glass of wine if you're allowed). Here are some easy hacks to help.
  8. Block the second layer of warp from view. So easy. So helpful. Just do it. I like gray but any color works.
As usual, if you receive this blog post via email, you need to visit my blog in your internet browser to see the video. Go to http://rebeccamezoff.blogspot.com. Or go see it on my YouTube channel and subscribe while you're there!

My last tip is that perhaps we all need a studio assistant as helpful as Topaz.

8 comments:

  1. Trish at Tangled ThreadsAugust 11, 2015 at 8:48 AM

    Royalties, I want royalties!

    ReplyDelete
    Replies
    1. I promise I'll send them once someone pays me for the blog. :-) Seriously, how could I not use Topaz for this post? What a good Mirrix user he is!

      Delete
  2. Loved seeing Topaz again. He is definitely a Mirrix lover. Do Claudia and Elena know about him? Lots of great warping tips too Rebecca. I already use most of them, but think I might try the extra colored warp thread on the selvage edges to help me keep a cleaner look.

    ReplyDelete
  3. I look forward to watching this. So far, warping my Mirrix has not become automatic or natural.

    ReplyDelete
  4. Does it matter if you have an odd or even number of warps?

    ReplyDelete
    Replies
    1. I talk about this in my online course. It depends.

      Delete

This blog has been moved to www.rebeccamezoff.com/blog. Please visit there to comment.

Note: Only a member of this blog may post a comment.